2018 Kubota U55-4G1

Selling Price -

$69,900.00

Information

2018 Kubota U55-4G1

Now available with an angle blade, the Kubota U55-4 offers customers versatility never seen before in the mid size 5 tonne excavator market. Powered by a reliable Kubota 47.6 HP engine, the Kubota U55-4 features a compact and well balanced design, combining exceptional power and the versatility to tackle any job and working condition with ease.

Tight Tail Swing

With its counterweight protruding a mere 2.5 inches, this tight tail swing model proves to be highly versatile when undertaking operations wherever space is confined.

Kubota Tier 4 Diesel Engine Using Common Rail System (CRS) and DPF

The Common Rail System (CRS) electronically controls the fuel injection timing and amount in stages rather than all at once for optimal combustion. The results are great efficiency, better fuel economy and less engine noise. Its combination with the Exhaust Gas Recirculation (EGR) and Diesel Particulate Filter (DPF) Muffler reduces emissions to make the U55-4 Tier IV compliant.

ROPS/FOPS Cab With Air Conditioning

The deluxe cab features improved climate control and air flow, wider entrance, suspension seat,and repositioned instrument panel.

Features may include:

Adjustable/Proportional Auxiliary Oil Flow

The maximum oil flow settings of both circuits are conveniently adjustable from the digital panel – no additional tools or complex manual adjusting procedures are necessary. You can even program up to five oil flow rates corresponding to specific attachments into memory on the digital panel.

Auxiliary Circuit 1 (Standard Equipment)

Controlled by the right-hand joystick, AUX1 supplies 19.8 gpm to operate attachments requiring hydraulic flow, like a breaker, thumb, or tilt bucket.

3RD Line Return

When working with one-way hydraulic attachments, such as a breaker or brush cutter, the standard third-line hydraulic return system allows oil to flow directly back to the tank without running through the control valves. This contributes to less oil contamination, reduced back pressure, and greater oil flow efficiency.

Photos

Highlights

  • $69,900.00
  • Echo Bay, Onotario
  • Pre-Owned
  • 2018
  • Kubota
  • U55-4G1
  • V2607-CR-E4
  • 3700
  • Diesel
  • Available
  • Under carriage shoe: 15.7 in. (400 mm) | Blade: 83 in. (2180 mm)
  • Dumping: 13 ft. 2 in. (4020 mm)

Specifications

  • 2018
  • Kubota
  • U55-4G1
  • Base
  • Compact
  • V2607-CR-E4
  • Diesel
  • Liquid
  • Natural
  • Four
  • 159.6 cu. in. (2615 cc)
  • Gross: 49.5 HP (35.5 kW) @ 2200 RPM | Net: 45.4 HP (33.8 kW) @ 2200 RPM
  • Dual element, cyclonic
  • Spin on type
  • Key
  • Auto travel negative brake | Safety equipment: Auto travel & swing
  • Voltage: 12 VDC, 75 AH
  • 12 V, 720 W
  • Cab - Outlet interior: 12 Volt
  • Travel (low range): 1.8 mph (2.8 km/h), (high range): 3.1 mph (5.0 km/h) | Unit swing: 9.3 rpm
  • Closed centre, Load sensing
  • Main: 2 variable, 2 gear
  • Total - gpm: 14.8 x 2/9.8 x 1/4.1 x 1 | Auxiliary: 19.8/9.8 gpm (75.0/37.0 lpm)
  • Tail swing radius: 41 in. (1045 mm) | Digging radius @ ground: 19 ft. 6 in. (5945 mm) | Boom swing angle: 70º left / 55º right | Tracks - Steel: 400 mm standard | Blade - Max. lift above ground: 17.3 in. (440 mm) | Blade - Maximum drop below ground: 16.1 in. (410 mm)
  • Top of cab: 100 in. (2550 mm) | Blade: 16.1 in. (410 mm)
  • 217 in. (5520 mm)
  • 77 in. (1960 mm)
  • On ground: 66.5 in. (1688 mm) | 98 in. (2500 mm)
  • 12.0 in. (310 mm)
  • Contact (Rubber): 4.48 psi. (0.315 kgf/cm²), (Steel/Angle blade): 4.72 psi. (0.332 kgf/cm²)
  • Under carriage shoe: 15.7 in. (400 mm) | Blade: 83 in. (2180 mm)
  • Dumping: 13 ft. 2 in. (4020 mm)
  • Digging: 142 in. (3615 mm)
  • Tank capacity: 18.0 gal. (68.0 L)
  • Capacity: 2.1 gal. (8.1 L)
  • 11.9 gal. (45 L)
  • Capacity: 60 A
  • Operating (Rubber): 12115 lbs. (5494 kg)/ 12535 (5685) | Operating (Steel/Angle blade): 12776 (5795)/12755 (5785)
  • Engine - EPA Rating: Tier 4 | Injection type: Direct | Self bleed fuel system: Standard | Cold weather start aid: Standard | Exhaust/muffler: Underhood | Engine - Radiator fan: Low noise, F shaped blades | Grease adjusted track tensioner: Standard | Fuel/water separator: Standard | Fuel filter: Spin-on type | Oil cooler: Standard | Suction filter: Spin-on type | Return filter: Spin-on type | Auto-idling system: Standard | Lights: 1 boom mounted, 2 cab mounted | Indicator lights: Warnings, maintenance | Instrument panel: Digital w/anti theft | Horn: Standard | Interchangeability between rubber & steel tracks: Standard | 30 ° angle shaped track frame: Standard | Seat belts: Standard | Grab handles for entry/exit: Standard | Non-slip entry / exit surfaces: Standard | Safety starting system: Standard | Control lever safety locks: Standard | Cab - ROPS Certified: Standard | Cab - FOPS Certified: Standard | Cab - Digging controls: Pilot operated, joystick levers | Cab - Operating pattern: ISO, or SAE | Cab - Blade controls: Separate lever | Cab - Pedals: Travel & boom swing | Cab - Track controls: 2 self centering levers | Cab - Auxiliary controls: Joystick mounted thumb switches | Cab - Boom swing controls: Foot pedal | Cab - Speakers & antenna: Standard | Cab - Beverage holder: Standard | Cab - Wiper (Front): Standard
  • Rubber: Standard
  • Diesel
  • High back, suspension w/recline